The Lenzora Commercial All-in-One Solar LED Street Light provides a practical alternative for projects that require dependable outdoor illumination without relying on grid electricity. Available in 100W, 150W, 200W, and 250W configurations, it combines the solar panel, rechargeable battery, LED lighting system, and intelligent controller within one durable fixture — all powered by high-quality Philips 3030 SMD LED chips for stable, consistent illumination.

What Is an All-in-One Solar Street Light?

An all-in-one solar street light combines the main components of a solar lighting system into a single fixture:

During the day, the monocrystalline solar panel converts sunlight into electricity and stores it in the built-in battery; at night, the system automatically uses that stored energy to light the surrounding area. Because it operates independently from the electrical grid, there's no need for trenching, underground wiring, or a permanent utility connection — particularly useful for remote locations, new developments, and rural roads.

Powered by Philips 3030 SMD LED Chips

The LED chip is one of the most important components of a commercial solar street light. It directly affects brightness, light consistency, energy consumption, heat management, and long-term performance.

Every model in this series is equipped with Philips 3030 SMD LED chips. These chips are arranged across the lighting surface to produce bright and evenly distributed illumination over roads, parking areas, pathways, and other large outdoor spaces. The 100W model contains 100 LED chips, while the largest 250W model contains 250 LED chips, allowing customers to select a configuration based on the size of the area and the required light output.

• Stable and consistent illumination
• Efficient conversion of stored battery power into light
• Uniform lighting across a wider outdoor area
• Reduced dark spots compared with poorly distributed lighting
• Reliable performance for commercial outdoor projects
• Improved lighting consistency over extended operating periods

Available Models and Complete Specifications

Lenzora offers four configurations for different outdoor lighting requirements. All models use Philips 3030 SMD LED chips, a monocrystalline solar panel, and a heavy-duty die-cast aluminum housing.

High-Efficiency Monocrystalline Solar Panel

Each model uses a monocrystalline solar panel — widely used in solar lighting for efficient conversion within a compact panel area — to charge the internal battery by day and power the Philips LED system by night, independent of grid electricity.

For the best charging performance, install the panel where it receives direct sunlight and isn't regularly shaded by buildings, trees, or utility poles.

High-Capacity Built-In Battery

Battery capacity plays an important role in the operation of a solar street light. The battery stores the energy collected by the solar panel and supplies power to the LED chips after dark. The available battery configurations are:

• PRO-100W: 3.2V 48Ah
• PRO-150W: 3.2V 66Ah
• PRO-200W: 12.8V 30Ah
• PRO-250W: 12.8V 36Ah

Because the battery is built into the fixture, there is no separate external battery box to install. This simplifies the overall structure and helps reduce the number of exposed components. Actual lighting duration and charging performance can vary according to sunlight exposure, installation angle, geographic location, season, weather conditions, operating mode, and local nighttime length.

Heavy-Duty Die-Cast Aluminum Housing

Commercial outdoor lights must withstand changing temperatures, wind, rain, dust, and long-term exposure to outdoor conditions. The Lenzora solar street light uses a die-cast aluminum housing, which provides several practical advantages:

• Strong structural support
• Effective heat dissipation
• Resistance to outdoor corrosion
• Lower weight than many steel structures
• Protection for the internal lighting components
• Suitability for long-term outdoor installation

Heat dissipation is especially important for high-output LED fixtures. The aluminum body helps transfer heat away from the Philips LED lighting system, supporting more stable operation.

Adjustable Mounting Bracket

Different installation sites require different lighting angles. A road, parking lot, warehouse yard, farm entrance, or pathway may each need a different fixture position to achieve suitable coverage. The adjustable mounting bracket allows installers to change the angle of the fixture according to the pole position, road width, installation height, and target lighting area. Correct positioning can help:

• Direct more light toward the required area
• Improve road and pathway coverage
• Reduce wasted light
• Minimize poorly illuminated areas
• Adapt the fixture to different pole configurations

Before permanent installation, the pole height, mounting angle, solar panel exposure, and required lighting coverage should be evaluated based on the actual project site.

Automatic Operation, No Trenching Required

The integrated controller manages daytime charging and nighttime lighting automatically: the solar panel charges the battery during the day, and the LED system activates when light levels drop — no manual switching required.

Because there's no direct grid connection, a conventional streetlight project's excavation, underground cabling, electrical distribution equipment, and utility connections aren't needed. Once the mounting pole and foundation are prepared, the fixture installs without running cables across the project area — particularly valuable for remote roads, farms, parks, private developments, warehouses, and new construction sites.

Recommended Applications

The Lenzora Commercial All-in-One Solar LED Street Light can be used in a wide range of environments:

How to Choose the Right Model

Choosing the correct solar street light depends on more than the wattage label. Project owners should also consider the required light output, installation height, road width, pole spacing, local sunlight conditions, and intended application.

• PRO-100W — smaller roads, entrances, pathways, and private properties.
• PRO-150W — medium-sized parking areas, community roads, farms, and commercial properties.
• PRO-200W — larger roads, warehouse yards, campuses, and industrial projects.
• PRO-250W — municipal roads, large parking lots, logistics centers, industrial parks, and other large outdoor areas.

For larger commercial projects, the required model and quantity should be determined according to the site layout and target lighting coverage rather than selecting solely by wattage.

Important Installation Considerations

To achieve better operating performance, consider the following factors before installation:

A Practical Solution for Commercial Outdoor Lighting

The Lenzora Commercial All-in-One Solar LED Street Light offers an independent lighting solution for roads, parking lots, warehouses, farms, campuses, parks, and remote outdoor locations. With four sizes, Philips 3030 SMD LED chips, high-capacity batteries, and durable die-cast aluminum housings, customers can select the PRO-100W, PRO-150W, PRO-200W, or PRO-250W according to required brightness, coverage area, and project scale.